Table Of Contents - JLG TOUCAN 1010 Service Manual

INTRODUCTION
Foreword
!
Important information
WORK PLATFORM CHARACTERISTICS
Description ------------------------------------------------------------------------------- 2.1
Characteristics - Dimensions - Performances --------------------------------- 2.2
PRESSURE SETTINGS
Relief valve setting -------------------------------------------------------------------- 3.1
Brake release circuit pressure check -------------------------------------------- 3.2
Circuit relief valve adjustment ----------------------------------------------------- 3.3
Main pressure (PR1) ----------------------------------------------------------------- 3.3.1
Right swing (PR2) -------------------------------------------------------------------- 3.3.2
Left swing (PR3) ---------------------------------------------------------------------- 3.3.3
Mast elevation (PR4) ---------------------------------------------------------------- 3.3.4
Jib elevation (PR5) ------------------------------------------------------------------- 3.3.5
Jib lowering (PR6) -------------------------------------------------------------------- 3.3.6
Brake release maximum pressure (PR7) -------------------------------------- 3.3.7
Drive at low speed (PR8) ---------------------------------------------------------- 3.3.8
Counterbalance valve setting ------------------------------------------------------ 3.4
BATTERY - CHARGER
Battery ------------------------------------------------------------------------------------ 4.1
Charger ----------------------------------------------------------------------------------- 4.2
Fulmen charger ----------------------------------------------------------------------- 4.2.1
Oldham-Hawker charger ----------------------------------------------------------- 4.2.2
Westinghouse-SGTE charger ----------------------------------------------------- 4.2.3
Battery filling ---------------------------------------------------------------------------- 4.3
Electrolyte specific gravity and battery voltage ------------------------------ 4.4
Centralised filling system maintenance ----------------------------------------- 4.5
Cleaning - Battery maintenance --------------------------------------------------- 4.6
Storage of a battery at temperature below 0°C (32°F) ------------------- 4.7
Use of a battery in a cold chamber or in a cold climate ------------------- 4.8
Battery not working continuously or inactive battery ---------------------- 4.9
Battery troubleshooting -------------------------------------------------------------4.10
4

TABLE OF CONTENTS

T o ucan 1010
1
2
3
4
Model
Révision 04-2006