Preventive Maintenance And Inspection Required; Daily Preventive Maintenance And Inspection; Weekly Preventive Maintenance And Inspection; Monthly Preventive Maintenance And Inspection - JLG TOUCAN 1010 Service Manual

7 PREVENTIVE MAINTENANCE AND INSPECTION
7.2. Preventive maintenance and
inspection required
! CAUTION
Control and maintenance intervals must be
respected to ensure safe operation of the
work platform. The work platform must not be
used if it is not operating PERFECTLY : it must
be repaired and checked by a qualified and
trained personnel before the machine is
returned to service.
NOTE
If the work platform has been left idle for a
long period of time, all the control, cleaning
and lubrication procedures described below
must be performed before the work platform
is used again.
7.2.1. Daily preventive maintenance and
inspection
Daily preventive maintenance/inspections should
include verification of the following items :
- Operator's and Safety Handbook
- Decals - warning and instruction
- Work platform
- Controls / indicators
- Tilt alarm
- Motion alarm
- Mast limit switches
- Steering limitation switches
- Overload detection
- Chain slack/breaking detection
- Battery state of charge
- Electrolyte level in battery cells
- Tyres condition
- Hydraulic oil level in reservoir
- Jib and attachments
- Screw and cotter pins for clevis pins
- Power track
- Lubrication
82
7.2.2. Weekly preventive maintenance
and inspection
Weekly preventive maintenance/inspections should
include verification of the following items :
- Wheels nuts
- Hydraulic hoses and fittings
- Battery (electrolyte level)
- Mast/jib cylinders
- Lubrication
7.2.3. Monthly preventive maintenance
and inspection
Monthly preventive maintenance/inspections should
include verification of the following items :
- Mast lifting chains (lubrication)
- Batteries (electrolyte specific gravity - cells
voltage)
- Lubrication
7.2.4. Every 125 hours of operation
preventive maintenance and inspection
Preventive maintenance/inspections should include
the previous preventive and maintenance inspections
and verification of the following items :
- Cylinders
- Mast lifting chains/pulleys
- Batteries
- Wheel nuts (torque value)
- Tilt indicator (setting)
- Overload detection (setting)
- Motor brushes of main hydraulic unit
- Motor ventilation holes (cleaning)
- Steering brakets thrust washers
- Brake release pressure
- Bushes (jib/steering system)
- Lubrication
7.2.5. Every 250 hours of operation
preventive maintenance and inspection
Preventive maintenance/inspections should include
the previous preventive and maintenance inspections
and verification of the following items :
- Hydraulic filters (replacement)
- Turntable bearing (greasing)
- Lubrication
T o ucan 1010
7
Model
Révision 04-2006