Mast Roller Removal; Upper Rollers - JLG TOUCAN 1010 Service Manual

5
Blocking must be used on parts that will receive two
bushings to prevent damage to the flange of the lower
bushing.
Models
Toucan 1010
Edition 04-2006
MAINTENANCE
Blocks

5.9 Mast roller removal

NOTE
The mast rollers (Qty 16) can be removed
one by one without removing the telescopic
mast.

5.9.1. Upper rollers.

1- Lower the mast.
2- Unscrew the locknut from the roller to be
removed using a polygonal spanner.
3- Unscrew the roller pin to release the bronze
spacer and free the roller as indicated below.
55
Spacer
Roller
Flange bushings
! CAUTION
Hold the bronze spacer, roller and washer
to prevent any of them from falling to the
bottom of the mast.
! CAUTION
Install the roller before removing another
one (refer to § 5.9.3).
5
Locknut
Roller pin
Roller pin washer
41