JLG TOUCAN 1010 Service Manual page 71

6 ELECTRICAL CONTROLS DEVICE
L : The module is installed in the emergency control box and is connected to the plug [CR20] on the main
OCATION
electronic card.
Description of Inputs / Outputs of the module :
E1 16-34
E2 19-33-37
E3 1
E4 20
E5 27
E6 18
E7 22
E8 11
E9 29
24
E10
E11 12
E12 8
E13 36
E14 3
E15 17
E16 4
E17 30
5
E18
E19 28
E20 10
E21 26
E22 2
E23 23
E24 21
E25 25
E26 6
E27 13
32
E28
Models
Toucan 1010
Edition 04-2006
1
20
Supply 24 V
Supply 0 V
Input Drive Forward control
Input Reverse Drive control
Output signal Drive Cutout
Supply to function "Pump Inhibit"
Input signal Drive cut out
Supply to coil [MAV]
Supply to coil [MAR]
Input Acceleratiorn order
Supply to coil [HI/LO] (-)
Input Differential lock control
Supply "Speed 1" controller acceleration order at 100%
Input fast drive speed control
Supply "Speed 6"
Input overload sensor
Supply to coil [EVF] (-)
Input structure movement control
Supply to coil [DV1] (+)
Supply to coil [DV1] (-)
Input for forced supply to [DV1]
Input signal of structure in lowered position
Forced supply to overload relay
Input auxillary sensor for authorization of simultaneous lowering
Input Jib lowering control
Input Mast lowering control
Supply to coil [DB]
Supply to coil [DM]
6
19
37
Analogic entry
Not used
Not used
Not used
Not used
71