To Datafill Table Ibnxla; Entering Feature Activation Codes - Nortel T1/SMDI Configuration Manual

February 2008

Entering feature activation codes

Introduction
The feature activation codes required to set up and access Message Waiting
are entered in table IBNXLA.

To datafill table IBNXLA

1 Type table ibnxla and press Enter.
2 Type add and press Enter.
3 Respond as shown in the following table:
Field Subfield
KEY
XLANAME
DGLIDX
RESULT
TRSEL
ACR
SMDR
Note: Not all the features below are required.
FEATURE
T1/SMDI and CallPilot Server Configuration
Entry Explanation and action
Consists of subfields XLANAME and
DGLIDX
Name of the translator, 1–8 characters, for the
feature
Access code for the feature
Consists of subfields TRSEL, ACR, SMDR,
and FEATURE
FEAT Feature translation selector
N Account codes not required
N Station Message Detail Recording off
CRA Call request activate
CRR Call request retrieve
Configuring the switch
87