Nortel T1/SMDI Configuration Manual page 47

February 2008
Protocol Options (subgroup title)
Prompt
Conn & Link Msgs
Modem Info (subgroup title)
Prompt
Protocol Select
PL Card
Dte Card
Modem Firmware
Symbol Rate
Receive Level
Eqlr Quality
Save Config
8 Press Enter at the Save Config: User Profile 0 prompt. Then press Esc.
Result: The display on one modem shows
TRAINING
ANS PL 2W
The display on the other modem shows
TRAINING
ORG PL 2W
T1/SMDI and CallPilot Server Configuration
Connecting the CallPilot server to the switch
Response
Conn After Link
Response
Auto Rel Mode
Domestic
EIA232E
(press right-arrow button to accept the default)
(press right-arrow button to accept the default)
(press right-arrow button to accept the default)
(press right-arrow button to accept the default)
User Profile 0
47