Table of Contents
Advertisement
CallPilot T1/SMDI interfaces
CallPilot T1 interface and EMC cable
requirements
CallPilot provides a T1 interface to connect to external switching equipment
using one or more T1 links. Customers can connect to a channel bank or
other equipment that meets the Nortel T1 interface specifications.
For more information on supported equipment, see:
Chapter 3, "Connecting the CallPilot server to the switch," on page 31
.
154
WARNING
Risk of personal injury and risk of hardware failure
Switches used with CallPilot require a single-point ground
topology to which the CallPilot Server must also be grounded.
For more information, see the "Site inspection checklist" and
"Single-point grounding requirements in the CallPilot
Installation and Configuration Task List."
Standard 1.13
.
CallPilot
Advertisement
Table of Contents
