Nortel T1/SMDI Configuration Manual page 41

February 2008
The parts to install
If the switch has an IOC shelf
two long-haul modems
a leased or private-line connection between the two modems (This is a
customer-supplied cable; pinouts are provided in this section.)
one modem cable (for connection between CallPilot COM 2 port and one
modem)
IOC cable (for a newer IOC shelf model, use NT0X96HJ; for an older
IOC shelf model, use NT0X96EH)
If the switch has an IOM (NTFX30AA)
two long-haul modems
a leased or private-line connection between the two modems (This is a
customer-supplied cable; pinouts are provided in this section.)
one modem cable (for connection between CallPilot COM 2 port and one
modem)
IOM cable (NT0X96LU)
Smart Connector (NTFX34AA), which is an adapter and line driver that
connects to the IOM cable
T1/SMDI and CallPilot Server Configuration
Connecting the CallPilot server to the switch
41