Table of Contents
Advertisement
February 2008
To change the local account passwords
To change the local account passwords when you run Configuration Wizard
and CallPilot is a member of a domain, perform the following steps:
1 Ask your network administrator to remove the CallPilot server from the
domain and add the server to a workgroup. You can also perform this
step on your own, if you acquire network administrator privileges from
your network administrator.
2 Shut down and restart the CallPilot system.
3 Run the Configuration Wizard and select the option to change the
account passwords.
4 Shutdown and restart the CallPilot system.
5 Ask your network administrator to add the CallPilot server to the domain.
You can also perform this step on your own, if you acquire network
administrator privileges from your network administrator.
6 Shutdown and restart the CallPilot system.
Continue with Chapter 6, "Testing the CallPilot installation," on page 133.
T1/SMDI and CallPilot Server Configuration
Configuring the CallPilot server software
131
Advertisement
Table of Contents
