Nortel T1/SMDI Configuration Manual page 57

February 2008
Datafill and servord (or ossgate) programming sequence
The following tables are listed in the order in which they are datafilled:
Table/Step
CUSTENG
CUSTHEAD
IBNLINES
IBNFEAT
OFCENG
MPC
MPCLINK
SLLNKDEV
OFRT
DIGCOL
UCDGRP
DNROUTE
LNINV
For SL-100/DMS-100
use servord to add
agents.
T1/SMDI and CallPilot Server Configuration
Action
Customer group identification
Customer group parameters
UCD line information (a result of SERVORD/
OSSGATE data input)
UCD line features (a result of SERVORD/
OSSGATE data input)
Checks the amount of memory available.
Assigns the MPC card.
Installs the MPC link.
Defines the data link characteristics.
Defines the office route to the CallPilot Voice
Messaging/Call Answering DN.
Defines the basic digit collection plan for the
customer group and any alternate digit collection
plans.
Defines the UCD group or groups.
Assigns the primary directory number to a UCD
group.
Defines the line location.
Add agents to the UCD groups.
Configuring the switch
57