Nortel T1/SMDI Configuration Manual page 136

Testing the CallPilot installation
If the CallPilot start sequence is passed successfully (that is, CallPilot
services are fully operational), the following dialog box appears:
Click OK to close the dialog box.
If there are errors, one of the following two dialog boxes appears (depending
on the severity of the problem):
Warning message
Close the dialog box by clicking the X in the upper-right corner. Check the
Event Browser or Alarm Monitor in CallPilot Manager for more details. For
instructions, refer to the online Help in CallPilot Manager.
136
Standard 1.13
CallPilot