To Add A User For Testing Purposes - Nortel T1/SMDI Configuration Manual

February 2008

To add a user for testing purposes

1 Log on to Windows 2003 on the CallPilot server. See "Logging on to
Windows 2003 on the CallPilot server" on page 102.
Note: Although you can access CallPilot Manager from any PC with
network access to the CallPilot server, later tests require that you be
logged on to the CallPilot server.
2 Log on to CallPilot Manager. See "Logging on to the CallPilot server with
CallPilot Manager" on page 105.
3 Click User
Result: The Express User Add window appears.
4 Type the required information. Each required field is marked with an
asterisk (*). Accept the default values for other fields.
For example, create a user named TEST USER.
ATTENTION
5 Click Advanced User Add.
Result: The Advanced User Add window appears, and the information
you have already entered appears.
6 Scroll down to the Security section of the window and specify a mailbox
password. Write down the password. Leave all other fields at their
default values.
7 Click Express User Add.
Result: The Express User Add window appears.
8 Click Add.
Result: CallPilot Manager displays a summary of the user just added.
T1/SMDI and CallPilot Server Configuration
➝
Add User.
The tests in this section use the mailbox number 8050
as an example. Ensure that you specify a DN that is
defined on the switch.
Testing the CallPilot installation
141