Chapter 24 - Changing Pre-Programmed Data; Introduction - Nortel Meridian 1 Planning, Installation And Operating Instructions

Chapter 24 – Changing pre-programmed
data

Introduction

Option 11C Compact
The pre-programmed data on the Meridian 1 Option 11C Compact system
provides an effective starting point for programming the system's telephone
and trunking information.
This chapter describes how to change the default numbering plan. It may be
necessary to change the numbering plan for one or more of the following
reasons:
• to change the first number in the numbering plan
• to shift the start of the numbering plan to another card slot
• the default numbering plan interferes with the system data
In addition to making changes to the default numbering plan, this section
provides information about modifying telephone model and trunk
programming stored in Option 11C Compact pre-programmed data.
Planning, Installation, Fault Clearing and CCBR Guide
Page 401 of 536