Nortel Meridian 1 Planning, Installation And Operating Instructions page 237

Page 218 of 536
553-3121-210 Standard 3.0
Chapter 20 — Meridian Mail Compact Option installation and maintenance
2 Plug the printer's AC power cord into an appropriate outlet, and turn on
the power. There is no need for it to be on the same circuit as the
Meridian Mail Compact Option cabinet.
3 Ensure that the printer is turned off.
4 Press and hold the setup button on the front control panel of the printer
and, at the same time, power on the printer.
Figure 49
The LA75 Plus Companion printer control panel
Ready
RDY
Serial Port
Set-up
5 Release the setup button one to two seconds after powering on.
The printer prints a list of the default settings. When the list is
complete, it goes back to the beginning of the list, reprints the first
setting, and stops. (Refer to
are all defaults.)
January 1999
Quiet/
Quality
Fault Quiet
↓
Table 31 on page
Protocol DEC LF
LQ
→
↑
219. Additional settings
FF
←