Chapter 15 – Installing and connecting
SDI and Ethernet ports
General information
Option 11C Compact
This chapter describes two procedures for connecting communication devices
to the Meridian 1 Option 11C Compact system.
Procedure 14 on page 129
terminals and modems. Instructions are provided on how to access ports
through the NTMW01 SSC and the NTMW10 Fiber Receiver card.
Procedure 17 on page 137
an Ethernet cable to the main cabinet.
Option 11C Compact system SDI ports are provided by the following cards:
•
NTMW01 SSC: provides three SDI ports
•
NTMW10 Fbr Rcvr card: provides one SDI port
Terminal setup instructions are given in
explains how to install and connect SDI ports to
provides instructions on how to install and connect
Procedure 16 on page
Planning, Installation, Fault Clearing and CCBR Guide
Page 125 of 536
131.