Nortel Meridian 1 Planning, Installation And Operating Instructions page 116

Chapter 12 – Adding an expansion cabinet
Procedure 5
Adding an expansion cabinet
1 Mount the expansion cabinet as described in
"Chapter 9 – Mounting the cabinets" on page
Make sure that it is mounted according to the equipment layout plan.
Make sure that it is securely mounted.
Note: The distance between the cabinets is limited by the length of
the A0632902 Plastic Fiber Optic Cable, which is 10 m (33 ft) long.
2 Install the cabinet ground wire as described in
"Chapter 10 – Installing the system ground" on page
Make sure that a minimum #6 AWG ground wire is used.
Make sure to test the ground.
3 Install the power supply as described in
the power supply" on page
Make sure the circuit breaker on the power supply is in the OFF
position.
Static electricity can damage the components of power supplies
and circuit cards. Wear an anti-static wrist strap or, if one is not
available, touch the frame of the cabinet before handling the
power supplies or other circuit cards.
Check the option switches on the power supply to make sure that they
are correctly set.
Option 11C Compact
89.
CAUTION
Planning, Installation, Fault Clearing and CCBR Guide
Page 97 of 536
79.
85.
"Chapter 11 – Installing