How To Upgrade Software On An Existing Option 11C Compact - Nortel Meridian 1 Planning, Installation And Operating Instructions

Page 306 of 536

How to upgrade software on an existing Option 11C Compact

553-3121-210 Standard 3.0
Chapter 22 — Upgrading software
Summary of steps
The Software Upgrading and Installation steps are summarized in the
following list. They consist of:
• Making sure that the Software Delivery (PCMCIA) card is installed.
• Selecting the System Upgrade function.
• Selecting Feature Set and packages.
• Selecting a database to install.
• Selecting Incremental Software Management (ISM) parameters.
• Validating keycodes.
• Loading the software.
• Upgrading the Software Daughterboard from NTDK21 to NTDK81
(when upgrading from X27 Release 1 software to X27 Release 2
software).
Upgrading to the new release of software
The following procedure describes how to upgrade and install the software
using Software Delivery (PCMCIA) card.
This procedure includes a SYSLOAD operation. A SYSLOAD will
interrupt service on the Compact system for up to 30 minutes.
Procedure 71
Software Upgrading Procedure
1 Perform a Data Dump (EDD).
To perform an EDD:
• Load overlay program 43 (LD 43).
• Enter command EDD.
January 1999
WARNING