3.1 Configuration
Configuration takes place typically via a web interface. Alternatively, configuration is
possible using the
2N
®
Configure
2N
IP Style
Launch your Internet browser (Chrome, Firefox, Internet Explorer, etc.).
Enter the IP address of your intercom (
Log in using the username
You have to know the IP address of your device to log in to the integrated web server.
®
Upon purchase,
2N
address automatically if there is a properly configured DHCP server in the LAN. If no
DHCP is available,
2N
to the
Configuration Manual for 2N IP Intercoms
details.
If your device remains inaccessible (you have forgotten the IP address or the LAN
configuration has changed, for example), change the LAN settings using the hidden
menu on the device.
IP Address Retrieval
Wait until the end of the introductory animation on the display after starting
/restarting the device. The moment the home screen appears (after approx. 20 s),
place your finger in the left-hand upper corner of the display for approx. 5 s.
The IP address of the device will be shown in the hidden menu. The menu contains the
network mask, default gateway address and DHCP switch among others.
Tip
To retrieve the device IP address you can also use 2N
Scanner, which can be freely downloaded from
If the address is 0.0.0.0, then the device did not get the IP address from the DHCP
server and the static IP address (DHCP OFF) has to be used. If DHCP OFF is set, the
device static address is 192.168.1.100.
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Access Commander
using your PC equipped with any Internet browser:
Admin
and password
IP Style
is set to the dynamic IP address mode – it retrieves the IP
®
IP Style
can be operated in the static IP address mode. Refer
software or the
My2N
http://192.168.1.100/
2n
.
®
for the
2N
www.2n.cz
service.
, e.g.).
IP Style
configuration
®
Network
.
80/105
Need help?
Do you have a question about the IP Style and is the answer not in the manual?