2N IP Style Installation Manual page 12

Extending Modules
Part No. 9155034
Part No. 9155037
2N TELEKOMUNIKACE a.s., www.2n.cz
®
2N IP Verso – I/O
The module provides logical inputs and
outputs for integration of sensors or other
devices. The module is installed under another
module, i.e. needs no separate position.
Inputs and outputs
RELAY1 – RELAY1 terminals with
accessible 30 V / 1 A AC/DC NO/NC
contact
RELAY2 – RELAY2 terminals with
accessible 30 V / 1 A AC/DC NO/NC
contact
IN1 – IN1 terminals for input used in
passive/active mode (
DC)
OFF = open contact or U
ON = closed contact or U
IN2 – IN2 terminals for input used in
passive/active mode (
DC)
OFF = open contact or U
ON = closed contact or U
TAMPER – Input for tamper switch
connection, 9155038
®
2N IP Verso – Wiegand
The module helps you interconnect your
system with other systems via the Wiegand
interface. The module is installed under another
module, i.e. needs no separate position.
− 30 V to +30 V
> 1.5 V
IN
< 1.5 V
IN
− 30 V to +30 V
> 1.5 V
IN
< 1.5 V
IN
12/105