Table of Contents
Advertisement
5. Intercom Configuration
Web Configuration Interface Login
The device is configured via a web configuration interface. You need to know the device IP
address and domain name to get access. Make sure that the device is connected to the local IP
network and properly powered.
Domain Name
Enter
the domain name as hostname.local (e.g. 2NIPStyle-00000001.local) to connect to the
device. The new device Hostname consists of the device name and serial number. See below for
the device name formats in Hostname. The serial number is entered without hyphens. You can
change Hostname in System > Network later.
2N Device
2N IP Verso
2N IP Verso 2.0
2N LTE Verso
Device Name in Hostname
2NIPVerso
2NIPVerso20
2NLTEVerso
Configuration manual for 2N IP intercoms
23 / 282
Advertisement
Table of Contents
