2N IP Style Installation Manual page 69

Caution
®
2N IP Style
connected, multiple Bluetooth modules may result in a undesired
behavior.
Induction Loop Module
The Induction loop module (
elements and is used form transmitting audio signals directly into a hearing aid via a
magnetic field.
The module contains two
These two connectors are fully interchangeable and can be used either as inputs
from the basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
Used mode: T
Maximum power: 2 W
Frequency range: 100 Hz – 5 kHz / ± 3 dB
External antenna (
Antenna output short circuit resistance: without limitation
Fingerprint Scanner Module
The Fingerprint scanner (
elements and is used for verification of human fingerprints for access control and
intercom / third party equipment control.
The module contains two
These two connectors are fully interchangeable and can be used either as inputs
from the basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
2N TELEKOMUNIKACE a.s., www.2n.cz
supports connection of just one Bluetooth module. If
Part No. 9155041
®
2N IP Style
Part No. 9155043 ) connection option
Part No. 9155045
®
2N IP Style
) is one of the 2N
bus connectors.
) is one of the 2N
bus connectors.
®
IP Verso system
®
IP Verso system
69/105