2N IP Style Installation Manual page 64

125 kHz RFID Card Reader Module
The 125 kHz RFID card reader (
elements and is used for reading RFID card IDs in the 125 kHz band.
The module contains two
These two connectors are fully interchangeable and can be used either as inputs
from the basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
EM4xxx
Caution
We recommend that the M-Bus and LAN cables are not crossed but
carried separately through one bushing to increase the reading distance
of this reader if combined with a touch display in a single installation.
2N TELEKOMUNIKACE a.s., www.2n.cz
Part No. 9155032 ) is one of the 2N
®
2N IP Style bus connectors.
®
IP Verso system
64/105