I&M Data - Siemens PROFINET SIRIUS 3RW5 Equipment Manual

Object Byte Bit Data format Parameters
No.
89 113 0 Bit2
90 114 0 Unsigned16
87 116 0 Bool
- 117 ... - -
119
1) Supported by 3RW5 HMI High Feature
Default encoding for 3RW5 HMI High Feature on the SIRIUS 3RW50 or 3RW52 soft starter
2)
Default encoding for 3RW5 HMI High Feature on the SIRIUS 3RW55 or 3RW55 Failsafe soft starter
3)
Not supported by SIRIUS 3RW50 and 3RW52 soft starter
4)
3RW5 HMI High Feature firmware version V3.0 or higher
5)
3RW5 HMI High Feature firmware version V3.1 or higher
6)
A.4.7 I&M data
The 3RW5 PROFINET communication modules, the 3RW5 soft starters and the 3RW5 HMI High
Feature support the following I&M data:
Number Name
I&M0 Device identification
I&M1 Equipment identifier
I&M2 Installation
I&M3 Description
Supported by SIRIUS 3RW5 PROFINET communication module
1)
Supported by SIRIUS 3RW50, 3RW52, 3RW55 und 3RW55 Failsafe soft starters
2)
Supported by 3RW5 HMI High Feature
3)
SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004
Value range
[encoding]
Trace Mode [0 ... 2]
6)
[0] Do not save automatical‐
ly
[1] Save automatically
[2] Save automatically and
delete older traces
Maximum Number 1 ... 255
Traces [1 ... 255]
6)
Do Control After Log Off [0 ... 1]
[0] Stop motor and give back
control
[1] Continue with motor
control
Reserved -
I&M data
Comment
This is stored in the device on initialization.
These are entered in the engineering system. -
Appendix
A.4 Data sets
Incre‐ 3RW5 HMI HF
ment
50 / 52 55 / 55‑F
[D 2) ] [D 3) ]
- r r
[0] [0]
1 r r
[1] [1]
- r/w r/w
[0] [0]
- - -
3RW5
PN 50 / 52 / 55 / HMI
1)
55‑F HF
2)
x x x
x -
- x -
- x -
1)
3)
201