History - Siemens PROFINET SIRIUS 3RW5 Equipment Manual

Description

3.1 History

When operating in an automation system:
• Programmable logic controller (PLC), e.g. SIMATIC S7-1500
• PC or programming device with installed controller configuration software, e.g. STEP 7 with
HSP or GSDML file
• Parameterization software (optional), e.g. SIRIUS Soft Starter ES (TIA Portal) (Page 34)
For exclusive use of SIRIUS Soft Starter ES (TIA Portal) via the 3RW5 communication module:
• PC with SIRIUS Soft Starter ES (TIA Portal) Premium / Professional (Page 34)
Basic knowledge of the following areas:
• General electrical engineering
• Drive technology
• Automation technology
• Handling the automation system and the software used
Target group
The manual is intended for everyone involved in the following tasks:
• Planning and configuring systems
• Installation
• Commissioning
• Service and maintenance
3.1 History
Release number
03/2018
02/2019
06/2020
05/2021
18
New features
• Initial release
• Revision of the manual
• Supplementary functions for the 3RW5 PROFINET Standard communication
module
(e.g. PROFIenergy)
• 3RW5 PROFINET High Feature communication module
• Revision of the manual
• Addition of contents for the 3RW50 and 3RW55 Failsafe soft starters
• Addition of contents for web server and OPC UA server for the 3RW5 PROFINET
High Feature communication module
• Revision of the manual
• Addition of content to firmware version V3.0 of the 3RW5 PROFINET High
Feature communication module
SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004