Data Set 231: I&M0 - Device Identification - Siemens PROFINET SIRIUS 3RW5 Equipment Manual

Appendix
A.4 Data sets
Note
I&M data
I&M0 data is assigned for all of the devices (3RW5 communication module, 3RW5 soft starter
and 3RW5 HMI High Feature) and can be read out. Only the proxy for the "Station" (Slot 0) has
adjustable and readable I&M1, I&M2 and I&M3 data. The "Station" comprises the following
devices:
• 3RW5 communication module (slot 1)
• 3RW5 soft starter (slot 2)
• 3RW5 HMI High Feature (slot 3)
Note
Access to I&M data
With PROFINET, the I&M data can also be accessed via data sets 0xAFF0 to 0xAFF3 (PNO).
A.4.7.1 Data set 231: I&M0 - Device identification
Only read access (r) is possible to the device identification (I&M0).
Byte Data length
0 10 byte
Byte Data length
10 2 bytes
12 20 bytes
32 16 bytes
48 2 bytes
50 4 bytes
54 2 bytes
56 2 bytes
58 2 bytes
60 2 bytes
62 2 bytes
202
Content
I&M header
Content
MANUFACTURER_ID
ORDER_ID
SERIAL_NUMBER
HARDWARE_REVISION
SOFTWARE_REVISION
REV_COUNTER
PROFILE_ID
PROFILE_SPECIFIC_TYPE
IM_VERSION
IM_SUPPORTED
Meaning
42 = Manufacturer ID SIEMENS
Article number
Serial number
Product version
Firmware version
Provides information about the parameterized
changes on the device.
Gives information about the profile supported by
the device and the line of products belonging to
the device.
Used to supplement the object "PROFILE_ID" and
contains further information on the profile.
Provides information about the version of the
identification data (0x0101 = Version 1.1).
Provides information about the available identifi‐
cation data (Index 2 to 4).
SIRIUS 3RW5 PROFINET communication modules
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004
Access
r
r
r
r
r
r
r
r
r
r