Command For The Pe Functional Scope; Commands For Pe Energy Saving Function - Siemens PROFINET SIRIUS 3RW5 Equipment Manual

Functions
8.1 PROFIenergy
Command ID
0x05
0x10
1) Supported by SIRIUS 3RW50 soft starter
Supported by SIRIUS 3RW52 soft starter from firmware version V2.0
2)
Supported by SIRIUS 3RW55 soft starter from firmware version V2.0
3)
Supported by SIRIUS 3RW55 Failsafe soft starter
4)
3RW55 soft starter from firmware version V2.1
5)
When using a 3RW5 PROFINET High Feature communication module from firmware version V1.1
6)
Additional information
You can find more information on PROFIenergy on the Internet by clicking on the following links:
• PROFIenergy - Siemens
feldgeraeteentwicklung/profile-und-features/profienergy/Pages/profienergy.aspx)
• PROFIenergy - PROFIBUS & PROFINET International (PI)
technology/profienergy/)
8.1.1

Command for the PE functional scope

Command
ID Modifier
0x05 0x00
Result
After receiving the command, the 3RW5 soft starter sends the requested information or an error
message.
8.1.2

Commands for PE energy saving function

Commands
ID Modifier
0x01 0x00
0x02 0x00
84
Command
PE_Identify
Query_Measurement
(https://w3.siemens.com/mcms/topics/en/comdec/
Command
PE_Identify
Command
Start_Pause
End_Pause
Group
PE functional scope
PE measured value function
Description
Command for providing a list of supported PROFIenergy commands
and functions.
Description
Command for switching to energy saving mode (Page 86).
Command for switching to operating mode.
Equipment Manual, 05/2021, A5E35631297002A/RS-AD/004
50 52
1) 2)
x x
x x
(https://www.profibus.com/
SIRIUS 3RW5 PROFINET communication modules
3RW
55 55-F
3) 4)
x x
x x