To the next parameter
End of service level – End –
To the start of the service
level
ESC
52/73
Building Technologies Division
18.2
Display of service values
18.2.1
Error history
Refer to section Parameter with index, with or without direct display/Example of
parameter 701: Error history.
Note!
Can be deleted for service (refer to chapter Parameter list)!
Refer to chapter Error code list!
18.2.2
Mains voltage
P
V
h min s
18.2.3
Intensity of flame
P
V
h min s
18.2.4
End of service level
P
V
h min s
P
V
h min s
P
V
h min s
Basic Documentation LME39...
18 Service level
Parameter 951: appears flashing.
Mains voltage is displayed on the right.
Example: 951: 224
%
The display shows parameter 954: flashing.
On the right, the intensity of the flame is displayed
as a microamperes (µA).
%
Example: 954: 0.0
When this display appears, you have reached the
end of the service level.
The display shows – End – flashing.
%
ESC
Press
The display shows OPErAtE.
%
When this display appears, you are back to
standby and you can change to the next level
mode.
%
Back to the previous
parameter
Back to the previous
parameter
To the end of the service
level
to return to operating mode.
CC1P7106en
08.12.2017