In-Feed Roller Mechanism - GBC DELTA Operator's Manual

Delta Laminator
Operator Manual
9.2

IN-FEED ROLLER MECHANISM

The in-feed roller mechanism consists of weight rollers (a), accelerating rollers (b), upper guides (c),
and sheet overlap sensor (d).
e d
c a b
9.2.1 WEIGHT ROLLERS
The weight rollers are always in contact with the paper sheets and press them onto the in-feed roller.
Their position is set by the manufacturer and should not be adjusted. If the paper weight is higher, the
pressure on the loading rolls has to be increased. A set of weights (e) is provided for that purpose. The
pressure can be changed by removing or adding a set of weights (e).
© 2004 General Binding Corporation 47