Adjustable Guide Plates - GBC DELTA Operator's Manual

Delta Laminator
10. GATE II
The function of the gate II (a) is to hold a sheet of paper and to release it so that the overlap of the
following sheets are within the tolerance of ± 1/16 in. (1.5 mm).

11. ADJUSTABLE GUIDE PLATES

The guide plates (a) prevent paper from folding. The guides form the paper before the laminating roll.
Their position can be adjusted by the screw (b) after loosening the nut (c). If a thicker paper is
processed, the plates have to be lifted so that the sheets will not deform.
b
c
If lighter weight paper is processed, the plates have to be tipped down to reform the paper.
© 2004 General Binding Corporation
Thick paper setting
Thin paper setting
Operator Manual
a
53