GBC DELTA Operator's Manual page 64

Delta Laminator
15. MACHINE TRANSPORTATION
The machine is shipped on a wooden pallet. The machine position on the pallet is shown below.
Use only a forklift or pallet truck to transport the machine. The forks must be long enough to reach past
the pallet supports of the machine at the further end of the truck, as shown below.
When the machine is taken off the pallet, it is necessary to:
•
Unscrew the clamping screws
•
Put the forks of the forklift between the pallet and machine frame
Moving the machine off the pallet to the floor is illustrated in the following illustration.
© 2004 General Binding Corporation
Operator Manual
65