GBC DELTA Operator's Manual page 97

Service Manual – Electrical
3.2.20 Status – the embossing unit attached to the machine is not running (it is
stopped)
Note:
Applicable only in case a embossing unit is attached to the machine.
Status indication:
•
START button/indicator is blinking.
•
Yellow ERROR indicator is lit up continuously.
•
Operator's panel, Main Screen, 1st status line:
•
Operator's panel, Main Screen, 2nd status line:
•
Error Screen:
Status correction:
•
The attached embossing unit must be set into operation by pressing the "START" button before
the machine is started. Then the laminating machine can be started with the "START" button.
3.2.21 Status – the number of sheets reached (COUNTER DOWN)
Status indication:
•
START button/indicator is blinking.
•
Operator's panel, Main Screen, 1st status line:
•
Operator's panel, Main Screen, 2nd status line:
•
Error Screen:
Status correction:
•
The laminating machine can be restarted by pressing the "START" button as long as setting of
the counter of sheets does not have to be changed.
30
Embossing machine
is not running
Counting down is finished
STATUS
Embossing m.
STATUS
Count finished
© 2004 General Binding Corporation
Delta Laminator