Delta Laminator
2.11 ADJUSTABLE GUIDE PLATES
Assembly and disassembly can be performed only by a GBC Service technician.
2.12 MACHINE MAIN DRIVE
The main drive roller chains are located under the sheet metal safety cover on the opposite side of the
operator.
Only a technician trained by a GBC Service technician can change or tighten the roller chains.
Maintenance should be performed as follows:
1. Disassemble the sheet metal safety cover.
2. Check the chains.
3. Tighten or adjust the chain, or change the spring.
4. Install the sheet metal safety cover.
© 2004 General Binding Corporation
Service Manual – Mechanical
15