Service Manual – Mechanical
1.2
SAFETY NOTICES – FEEDER MAINTENANCE
In the automatic operation the feeder table moves upwards in steps. When a new paper stack is
loaded, the table moves both upwards and downwards. To assure safe work, the following rules must
be observed.
Important
•
The feeder lifting mechanism can be adjusted and greased only by a trained and responsible
person.
•
Use the "STACK UP" and "STACK DOWN" buttons only for moving the table up and down.
•
Grease the feeder head mechanisms only when the machine is stopped.
1.3
SAFETY NOTICES – MAIN DRIVE MAINTENANCE
The main motor drives, the feeder head, in-feed wheels, gate II, laminating roller, and drive
mechanisms are located opposite the operator's side and are covered with a sheet metal cover. To
assure safe work, the following rules have to be observed.
!
WARNING
Obey the following precautions. Failure to do so can result in severe personal injury or damage the
machine.
•
Cut the compressed air supply off to adjust the gate II and pressure roller mechanisms.
•
The main drive mechanism can be adjusted by a trained person only.
4
Delta Laminator
© 2004 General Binding Corporation