Preparing The Machine; Starting The Machine - LAVAZZA blue CLASSY CUSTOM MILK LB1050 Instructions Manual

We are not liable for any damages in case of:
incorrect use and other uses than the in-
tended purposes;
• repairs performed at unauthorised
service centres;
• tampering with the power cord;
• tampering with any part of the machine;
• use of spare parts and accessories which
are not original;
• no water softening;
• storage in rooms below 4°C (39,2°F);
• use below 5° C (41°F);
• use over 40° C (104°F);
• using non-compatible capsules.
In any of these cases, the warranty is can-
celled.

STARTING THE MACHINE

Set the machine on a flat, stable surface, far
away from water or heat sources.
Do not connect the machine to the power
mains before filling the tank.
Damage caused by failure to apply these in-
structions will void the guarantee.
Lift and remove the cover, then the water tank
itself.
Rinse the tank before using it.

PREPARING THE MACHINE

The use of a water filter (an optional accessory)
improves water quality and prolongs machine life.
Only use products specifically for coffee ma-
chines, commonly available on the market and
in compliance with current pertinent standards.
In order to insert the filter, follow the instruc-
tion sheet which comes with the accessory.
Change the filter at the intervals indicated on
the filter instructions sheet.
Fill the water tank up to the MAX level in-
dicated, using only fresh drinking water.
Fit the tank back into place, then close by us-
ing the cover.
The cover can be lifted to fill the tank directly.
The water level should never exceed the
MAX indication.
Only use non-carbonated fresh water.
Hot water and other liquids can damage the
tank.
MAX
Make sure that the hands, the machine, the
cord and the support surface of the machine
are not wet.
Insert the plug into the socket.
EN
43