Connecting The Supply And Work Tubing - Festo CP Series Manual

3. Installation

3.2.2 Connecting the supply and work tubing

With pneumatic multiple connector plate
1
3/5
11
2
Connection Tubing
code
ISO 5599
1 or 11 Compressed air/
vacuum
2 or 4 Work air/vacuum
3/5 Exhaust right/
left-hand end plate
Pneum. multiple
connector plate
12/14 Auxiliary pilot air/
or exhaust right/
82/84 left-hand end plate
Pneum. multiple
connector plate
Fig. 3/3: Assigning the connections
3-8
Fit the screw connectors or silencers as shown in the
table below. Then connect the tubing.
1
12/14
82/84
11
4
Connection size ISO 228,
Specifications in brackets
for extended pneum.
multiple connector plate
CPV10
G 1/8
M7
G 3/8
G 1/4
M5
M7 (M5)
Without pneumatic multiple connector plate
2
1
4
CPC14 CPV18
G 1/4 G 3/8
G 1/8 G 1/4
G1/2 G 1/2
G3/8 G 1/2
G 1/8 G 1/4
G 1/8 G 1/4
82/84
3/5
12/14
11
Connection
Screw connector in end
plates or pneumatic
multiple connector plate
Screw connector
Screw connector
- for ducted exhaust air
- for silencers
Screw connector on
connection 82/84
- for ducted exhaust air
- for silencers
CPV... 9802