Libraries - Festo Controller CECC Manual

Festo Controller CECC
2.5

Libraries

To simplify programming, CODESYS V3 pbF enables usable objects such as
function blocks
–
declarations
–
visualisations
–
to be organised into project-independent libraries.
Library
Festo_CECC_3.library
Festo_CECC_IOLink_3.library
Festo_EasyIP_3.library
Festo_Motion_3.library
Festo_CVE_3.library
Festo_CameraControl_3.library For accessing the Compact Vision System SBO...-Q.
Festo_SerialComEx_3.library
Table: Libraries for programming the CECC
A Library Manager that can be used to integrate and view libraries is available for this.
Detailed descriptions of the libraries and how to program them can be found in the respective
online Helps.
6
Comment
For controlling and parameterising the CECC.
For controlling and parameterising the IO-Link devices.
For simple networking of controllers via EasyIP.
For configuring motor controllers from Festo (e.g. CMMP-AS).
For actuating motor controllers that support the CVE protocol from
Festo (e.g. CMMO-ST).
For configuring the serial interfaces RS232, RS422 and RS485.