Swinging the Jib
NOTE:
For 1000 lb. (454 kg for ANSI markets and 450 kg for CE and
Australia markets) mode operation, the jib must be centered
and the Jib Swing function is not operable. If the jib is out of the
centered position when in this mode, the jib swing function will
allow the operator to center the jib again.
To swing the jib, use the Jib Swing control to select Right or Left
direction.
4.12 FUNCTION SPEED CONTROL
This control affects the speed of all boom functions and Platform
Rotate. When in the CCW maximum position, Drive is placed in
creep speed.
3121170
SECTION 4 - MACHINE OPERATION
4.13 MACHINE SAFETY SYSTEM OVERRIDE (MSSO)(CE
ONLY)
The Machine Safety System Override (MSSO) is
used to override function controls for Emergency
Platform Retrieval only. Refer to Section 5.5,
Machine Safety System Override (MSSO)(CE Only)
for operating procedures.
4-21