Duplicating A Device - Webdyn WebdynSunPM User Manual

• 0-10V
Name Input name. This value will be used on the web pages and on the MQTT
servers
The name on the concentrator must be unique
Action Action associated with the input. The authorised values are:
The possible actions are:
• Ignored: The value will be ignored. The variable is disabled. It will
• Instant value: the input is of the instant value type. The data read at
• Alarm on change: the input is of the alarm type. When a status
Scale Contains the multiplier to apply to the input so that it complies with the unit
described in the "unit" field. This multiplier is a floating point number using
a decimal point ". "
This factor is there to inform users and is not applied to the data sent in the
data files.
Offset Contains the offset to apply to the input so that it complies with the unit
described in the "unit" field. This offset is a floating point number using a
decimal point ". "
This factor is there to inform users and is not applied to the data sent in the
data files.
Unit Local web site display unit. The value is not used elsewhere.
Tag Contains an identification making it possible to use the variable in scripts.
(Calculation of totals, issuing of commands to multiple devices, etc.). This
name must be unique to allow unambiguous identification and use in the
scripts.

3.2.1.2.5 Duplicating a device

To duplicate a device, first select the device to duplicate:
The click the duplication button:
Version 2.05
préliminaire
not appear in the data files
collection time will be stored in the data file using a single field.
change is detected, an alarm is triggered. The data read at collection
time will be stored in the data file using a single field.
USER MANUAL – WebdynSunPM
89