Appendix A: "_Config.ini" File - Webdyn WebdynSunPM User Manual

Appendix A: "_config.ini" file

The authorised configuration parameters in the "<uid>_config.ini" file are the following:
Parameter
BIN_Checksum
BIN_FileName
Concentrator_Identifier
FTP_DirAlarm
FTP_DirBin
FTP_DirCert
FTP_DirCmd
Version 2.05
préliminaire
Description
Indicates the firmware name to use to
update the gateway software. This
parameter cannot be empty if
BIN_FileName contains a value.
The firmware thus named must be in the
configured binary directory.
See the section on update configuration for
how to use updates. (3.1.2.1)
Indicates the checksum for the firmware
indicated in the BIN_FileName field.
This parameter cannot be empty if
BIN_Checksum contains a value.
See the section on update configuration for
how to use updates. (3.1.2.1)
Gateway identifier (uid)
If this field is left empty, the default
identifier is used.
FTP 1 server directory in which the alarms
from the concentrator are stored.
Note that the directory MUST exist. The
concentrator will not create it when
uploading files.
FTP 1 server directory in which the
concentrator will get the update files when
requested.
See the section on update configuration for
how to use updates. (3.1.2.1)
FTP 1 server directory in which the
concentrator will get the certificates to use
for MQTT connections.
See the MQTT configuration section for
more details.
FTP 1 server directory in which the
concentrator will get the command files
used later.
USER MANUAL – WebdynSunPM
Default value
WPMABCDEF (where ABCDEF
are the last characters of the
serial number).
/ALARM
/BIN
/CERT
/CMD
160