Def", The Definitions - Webdyn WebdynSunPM User Manual

The current configuration is available on the remote server in the "CONFIG" directory.
Whether after a local or a remote configuration update, the concentrator sends its new
configuration to the remote server at the next connection.
Configuration files can be sent remotely using the FTP "CONFIG" directory. Configuration files
must be uploaded or modified in the FTP "CONFIG" directory. On the next connection to the
FTP server, the concentrator will carry out 2 steps:
1. Download the configuration file available on the server,
2. Apply the new configuration.
The configuration file names indicated above must be respected.
Once the new configuration has been applied, the result is indicated in the concentrator's log
file.
If there is an error in the configuration file such as an incorrect value, the concentrator will
not take it into account and will use its default value if one exists, otherwise the file will be
rejected. The LOG file will report the error and the applied default value.
Refer to section 3.1.2.1: "Concentrator operation" or to "Appendix A: "_config.ini"
file" to see the list of variables and their possible values.

4.1.2 "DEF", the definitions

The devices declared in the "<uid>_daq.csv" file use a definition file describing all the available
variables on the device. The devices available on the concentrator are:
• Inputs/outputs: IO
• Remote customer information: TIC
• RTU/TCP Modbus
• Proprietary inverter protocols
The definition files the WebdynSunPM can generate automatically are:
• The IO file
Version 2.05
préliminaire
USER MANUAL – WebdynSunPM
130