Webdyn WebdynSunPM User Manual page 134

"Action" Description
code
8 the instant value is reported and and alarm is generated every time the
value changes.
The device or interface data file data is the following:
nbVariableDevice_N;indexVariable_1_Device_N;indexVariable_A_Device_N
datetime_1;variable_1_value_1_Device_N;variable_x_value_1_Device_N
datetime_2;variable_1_value_2_Device_N;variable_x_value_2_Device_N
...
datetime_Y;variable_1_value_B_Device_N;variable_A_value_B_Device_N
Colour code:
•
Green: Optional header that can be enabled or disabled using the
"FTP1_HeaderOption" parameter for server 1 and "FTP2-HeaderOption" for
server 2 in the <uid>_config.ini configuration file
• Blue: Device-specific information or data.
Where:
• nbVariableDevice_N: Total number of collected variables for device N
• indexVariable_X_Device_N: Index X of collected variables for device N
• datetime_Y: data timestamp at acquisition point Y. For the format, see variable
FTP_EuroDateFormat or FTP2_EuroDateFormat in section 3.2.2.5: "Servers"
• variable_A_value_B_Device_N: Value A of Variable B corresponding to Index A
collected at acquisition point Y and the action defined in the definition file for device
N.
To avoid needlessly sending data to the server and thereby optimise the connection,
it is recommended to only enable the variables that need to be reported.
TIC:
The webdynSunPM permanently collects the data from the TIC flow and saves the read data
without interpretation. Only the displayable characters from the ASCII table (from 0x40 [SP]
to 0x7E [~]) are saved in the data files. It may therefore be possible that some values are not
saved if the TIC flow is disrupted.
The information on the returned values is in ENEDIS specification "Sorties de téléinformation
client des appareils de comptage électroniques utilisés par Enedis" version 6 (Enedis-NOI-
CPT_02E) and "Sorties de téléinformation client des appareils de comptage Linky utilisés en
généralisation par Enedis" version 2 (Enedis-NOI-CPT_54E).
Example of a TIC data file with an acquisition frequency of every 10 minutes in CSV format
(edited using Excel):
Version 2.05
préliminaire
USER MANUAL – WebdynSunPM
134