Webdyn WebdynSunPM User Manual page 165

Parameter
FTP2_EuroDateFormat
FTP2_HeaderOption
FTP2_Login
FTP2_Password
FTP2_Port
FTP2_SynchroniseCertificates
FTP2_TwoStepsSendingDisabled Used for file transfers in 2 steps using a
FTP2_UploadLog
LOG_Level
NTP_Server1
Version 2.05
préliminaire
Description
Indicates the format used to timestamp the
data sent to the FTP 2 server.
The possible values are:
• 0: the ISO format is used (YY/MM/D-
HH:MM:SS)
• 1: the European format is used
(DD/MM/YY-HH:MM:SS)
Indicates whether the gateway must add the
optional headers in the data files uploaded to
the FTP 2 server
The possible values are:
• 0: no optional header
• 1 : optional headers generated
The login to use to connect to the FTP 2
server.
This value is mandatory.
The password configured for the login
configured in the "FTP2_Login" parameter
to connect to server FTP 2.
The network port to use to connect to the
FTP 2 server.
(Future upgrade)
temporary file while the file is not complete
on the FTP 2 server:
The possible values are:
• 0: the temporary file is used
• 1: the temporary file is not used
Indicates whether the gateway must also
upload the internal programmed connection
operating logs in the FTP 2 server log upload
directory.
The possible values are:
• 0: no file upload
• 1: file upload
The concentrator log level in the system
files.
Used for the box debug mode.
The parameter impacts the system log detail
level (see section 4.1.8.4: "System logs")
The values will be given by Webdyn support
if needed.
st
1 server to query to set the date/time.
(factory value: pool.ntp.org)
USER MANUAL – WebdynSunPM
Default value
0
0
21
0
0
0
3
165