Power Button; Factory Reset Button - Webdyn WebdynSunPM User Manual

Power button

Power LED
2.4.3.1 Power Button
The Power button on the front of the product is used to shut down and reboot the
concentrator.
A long press on the Power button causes the "Activity" indicator to flash every second and is
used to trigger the following actions:concentrator reboot: a 2-second press (2 Activity LED
pulses)
• concentrator shut down: a press longer than 5 seconds (At least 5 Activity LED pulses)
When the product has been shut down, it can be rebooted by simply pressing the Power
button.

2.4.3.2 Factory Reset button

The Factory Reset button is used to recover the product in any situation (loss of IP address,
loss of login and password, etc.).
A long press on the Factory Reset button causes the "Activity" indicator to flash every second
and is used to trigger the following actions:
• IP parameter reinitialisation: a press of between 4 and 14 seconds (at least 4 and at
maximum 14 Activity LED pulses)
• Reinitialise all parameters and all data: a press longer than 15 seconds (at least 15
Activity LED pulses)
Version 2.05
préliminaire
Activity
LED
Serial LED (Tx & Rx)
USER MANUAL – WebdynSunPM
Factory Reset button
WAN LED
26