Webdyn WebdynSunPM User Manual page 156

General gateway use
How do you reinitialise the concentrator?
There are 2 methods to force a concentrator factory reset:
• Press the Factory Reset button on the concentrator for 20 seconds:
Wait. The concentrator will reboot using its factory configuration.
• If a SIM card is installed and configured, a "factory" text message can also be used for
factory reset. Just send the "factory" text message to the SIM card phone number (see
section 3.3.7: ""factory" reset command")
The factory reset restores the original configuration. The data is not kept.
Can the gateway send commands to connected devices?
It is possible to send commands to connected devices if they accept them.
How long can data be stored for?
The WebdynSunPM can store up to 50Mb of uncompressed data per declared device.
If there is no access to the remote server, the WebdynSunPM concentrator can store the data
for several months.
The maximum data storage time varies depending on the amount of data to be collected and
the configured collection frequency.
The average storage time varies from 3 to 4 months.
Version 2.05
préliminaire
USER MANUAL – WebdynSunPM
Factory Reset button
156