Rebooting The Webdynsunpm - Webdyn WebdynSunPM User Manual

7 Please wait while the update is applied and the concentrator restarts.
8 Refresh the web page (F5 key on the keyboard)
9 Connect back to the concentrator (see section 3.2: "Embedded web interface")
10 Go back to the concentrator's "Upgrade" page
11 Check that the new version is shown in the Firmware version field.
The concentrator has been updated.
Do not disconnect the concentrator and avoid operations on it during its update.
If an error occurs during the update, the concentrator will keep its previous
operational firmware. In that case, repeat the update procedure exactly as
indicated.

3.2.3.3 Rebooting the webdynSunPM

The reboot menu is used to reboot the webdynSunPM.
Version 2.05
préliminaire
USER MANUAL – WebdynSunPM
117