Webdyn WebdynSunPM User Manual page 163

Parameter
FTP_TwoStepsSendingDisabled
FTP_UploadLog
FTP2_DirAlarm
FTP2_DirBin
FTP2_DirCert
FTP2_DirCmd
FTP2_DirConfig
Version 2.05
préliminaire
Description
Used for file transfers in 2 steps using a
temporary file while the file is not complete
on the FTP 1 server:
The possible values are:
• 0: the temporary file is used
• 1: the temporary file is not used
Indicates whether the gateway must also
upload the internal programmed connection
operating logs in the FTP 1 server log upload
directory.
The possible values are:
• 0: no file upload
• 1: file upload
FTP 2 server directory in which the alarms
from the concentrator are stored.
Note that the directory MUST exist. The
concentrator will not create it when
uploading files.
FTP 2 server directory in which the
concentrator will get the update files when
requested.
See the section on update configuration for
how to use updates. (3.1.2.1)
FTP 2 server directory in which the
concentrator will get the certificates to use
for MQTT connections.
See the MQTT configuration section for
more details.
FTP 2 server directory in which the
concentrator will get the command files
used later.
See the command file configuration use
section for more details
FTP 2 server directory to which the
concentrator uploads its configuration files.
Note that the directory MUST exist. The
concentrator will not create it when
uploading files.
USER MANUAL – WebdynSunPM
Default value
0
0
/ALARM
/BIN
/CERT
/CMD
/CONFIG
163