Nortel CallPilot 201i Installation And Configuration Manual page 89

October 2002
Component
Channels
DS30X link
To start or stop a component
1 In CallPilot Manager, click Maintenance
Result: The Maintenance page appears.
2 Click the plus sign (+) beside the CallPilot server to expand the
component tree.
3 Continue clicking the plus sign (+) until the component with which you
want to work is visible.
4 Click the hardware component that you want to start or stop.
Result: The Maintenance page refreshes to show details about the
component.
5 Scroll down to the Maintenance section.
The following is an example of the Maintenance section for an MPC-8
card:
6 Click Courtesy Stop, Stop, or Start, as required.
Button
Start
Part 5: 201i Server Maintenance and Diagnostics
Using CallPilot Manager to monitor hardware
Effect of stopping
Takes the selected DS30X channel out of
service.
Takes the selected DS30X link out of service.
Description
If the selected component is out of service, click this
button to put it into service.
Maintenance Admin.
89