Nortel CallPilot 201i Installation And Configuration Manual page 135

October 2002
Correct card insertion
Four specially designed card slots for the MPC-8 are located on the 201i
server faceplate. The MPC-8 card is keyed so that it fits only one way into
the slot on the 201i server faceplate. If the card is inserted incorrectly, the
card does not go all the way into the slot.
.
Location of MPC slots
There is an ejector button, slot, and LED for each MPC. The following
diagram shows where they are located on the 201i server:
MPC status LEDs
MPC ejector buttons
(slots 4 and 5)
MPC slots 4 and 5
MPC slots 2 and 3
MPC ejector buttons
(slots 2 and 3)
MPC status LEDs
Part 5: 201i Server Maintenance and Diagnostics
Performing hardware maintenance and mechanical assembly
CAUTION
Risk of equipment damage
If you force the card into the slot incorrectly, this can result in
damage to the MPC-8 card and the 201i server.
G101440
135