Nortel CallPilot 201i Installation And Configuration Manual page 138

Performing hardware maintenance and mechanical assembly
To install an MPC-8 card
1 Ensure that the MPC-8 card label is facing one of the following ways:
facing to the right if the 201i server is inserted into the IPE shelf (see
the following diagram)
facing up if the 201i server is lying horizontally on a flat surface
2 Insert the card into the slot, and gently push it until it is firmly in place and
the ejector button pops back out.
3 Ensure that the MPC's LED lights up green.
138
Standard 1.0
G101541
CallPilot