Nortel CallPilot 201i Installation And Configuration Manual page 63

October 2002
To run the netstat command from Windows NT 4.0
1 Click Start
command prompt window.
Result: The MS-DOS Command Prompt window appears.
2 At the MS-DOS prompt, type netstat with the required parameters.
3 Press Enter.
Result: The system runs the netstat utility.
4 Type Exit to exit MS-DOS and return to Windows NT 4.0.
Part 5: 201i Server Maintenance and Diagnostics
Programs Command Prompt to display the MS-DOS
Using Windows NT online diagnostic tools
63